carrier infinity flashing yellow light compressor

#Carrier infinity flashing yellow light compressor how to

If the word “SUNDAY,” “MONDAY,” “TUESDAY,” “WEDNESDAY,” “THURSDAY,” “FRIDAY,” or “SATURDAY” appears at the top of the screen, you are ready to start.

Selecting “ALL ZONES” allows you to simultaneously program one day across all zones.

Pres the ZONE button until the correct zone name that you want to program appears on the upper left screen.

You can program a different schedule for each day of the week by using the SUNDAY, MONDAY, TUESDAY, WEDNESDAY, THURSDAY, FRIDAY, and SATURDAY screens.

Or, to create a custom schedule for the remaining zones, press the ZONE button to select the next zone you wish to program.

Exit the scheduling mode by either closing the door or pressing the SCHEDULE button.

Set the remaining periods, “DAY,” “EVENING,” AND “SLEEP” by using the SCROLL button to select a time period, then follow steps 5-9 to select temperature and time settings.

Set the cooling temperature using the TEMP (+/-) button.

Set the heating temperature using the TEMP (+/-) button.

Set the start time for this time period using the TIME (+/-) button.

The WAKE time period will be highlighted.

Press either the LEFT or RIGHT button repeatedly until “ALLDAYS” is displayed.

Selecting “ALL ZONES” allows you to create one schedule for the entire home.

Press the ZONE button until the name of the zone you wish to program appears on the upper left screen.

Press the SCHEDULE button to access the schedule screen.

Flip down the door at the bottom of the control.

To create one comfort schedule that will repeat every day follow the instructions below:

#Carrier infinity flashing yellow light compressor how to

How to Program Carrier Infinity Thermostat One Schedule for All Days Check for 24VAC between the C and D terminal connector of outdoor unit.Recheck wiring to ABCD connector on outdoor unit.If display says “Outdoor Unit Not Found” (two-stage communicating outdoor unit): Add other devices one at a time to determine where the communication issue exists. If display still reads “Indoor Unit Not Found”, disconnect accessories and all devices from ABCD and connect User Interface directly to indoor unit with a short piece of thermostat wire.Make sure all colors match for every terminal,.Check fuse on indoor unit’s circuit board.Check for 24VAC between the C and D terminals at Infinity Control terminal connector and Damper Control Module.Make sure power is supplied to the indoor unit, and the amber LED is lit on indoor control circuit board.Make sure all colors match for every terminal.Cooling is confirmed when the blue LED adjacent to the blue CL button is lit.Ĭarrier Infinity Touch Thermostat Troubleshooting If Infinity control does not power up: Or, press the HOLD button to override the schedule indefinitely.Ĭheck this too: Common Honeywell Thermostat Problems and How to Fix Them To adjust cooling temperature: You can change the override time in 15-minute increments by pressing the TIME (+/-) button until the desired override time is selected.Note that an override time will not appear if programming has been turned off. An override time will be displayed on the lower left. Use the TEMP (+/-) button to select your desired temperature, which will be displayed on the lower right.Press the ZONE button for three seconds to activate the “ALL ZONES” feature. Selecting “ALL ZONES” allows you to select one temperature for the entire home. Press the ZONE button until the name of the zone you wish to control appears on the upper left screen.Heating is confirmed when the red LED adjacent to the red HEAT button is lit. Adjust the desired cooling humidity using either (+/-) button. Press the blue COOL button to set the cooling humidity.Adjust the desired heating humidity using either (+/-) button. Press the red HEAT button to set the heating humidity.Adjust the current DAY setting using the TIME (+/-) button, until the correct day is displayed. Adjust the MINUTE setting using the TIME (+/-) button. Adjust the highlighted HOUR setting using the TIME (+/-) button.Flip down the door at the base of the Infinity Control.How to Set Up and Operate a Carrier Infinity Thermostat To set day, timer and desired humidity: To help users set up, operate and resolve problems they may have with their Carrier Infinity thermostats, here is a clear troubleshooting and how-to guide addressing some of the commonly-reported issues with these controls. Other users may have challenges with their setup and operation.

But these systems can also experience issues from time to time. Carrier Infinity Thermostats are good quality and reliable units that effectively manage humidity levels, airflow, ventilation, and indoor air quality among other things.